How to Install Home Decorators Collection Vinyl Plank Flooring

How to Install Home Decorators Collection Vinyl Plank Flooring

Things You’ll Need

Things You’ll Need

Before beginning the installation of Home Decorators Collection Vinyl Plank Flooring, you should gather the following tools and materials:

  • Tape measure
  • Carpenter’s square
  • Utility knife
  • Circular saw
  • Level
  • Pry bar
  • Vinyl plank flooring
  • Flooring underlayment
  • Tapping block
  • Foam underlayment

Preparing the Subfloor

Preparing the Subfloor

Before you install the Home Decorators Collection Vinyl Plank Flooring, you must prepare the subfloor. Start by removing any existing flooring, including any carpet, tile, or vinyl. Make sure to check for any nails or screws that may have been left behind and remove them. If there are any cracks or holes in the subfloor, use a floor patching compound to fill them in. Once you’ve filled in all the cracks and holes, sand the subfloor smooth. Finally, vacuum up any sawdust or debris that may have been left behind.

Installing the Underlayment

Installing the Underlayment

Before you can install the Home Decorators Collection Vinyl Plank Flooring, you must install an underlayment. The underlayment serves two purposes - it provides a cushion between the subfloor and the vinyl plank flooring, and it helps to reduce noise. Start by laying a 6-mil plastic sheet over the subfloor. Then, roll out the foam underlayment, overlapping each piece by 8”. Secure the underlayment to the subfloor using a pneumatic stapler.

Installing the Vinyl Plank Flooring

Installing the Vinyl Plank Flooring

Once you have the subfloor prepared and the underlayment installed, you can begin installing the Home Decorators Collection Vinyl Plank Flooring. Start by laying out the planks in the room. Be sure to stagger the planks so that the seams of each plank are at least 6” away from the seams of the adjacent plank. You can use a tape measure and carpenter’s square to ensure that the planks are aligned properly. Once the planks are in place, use a utility knife to cut off any excess material.

Next, you can start installing the planks. Start in the corner of the room and work your way out. Use a level to ensure that the planks are even and flat. When installing the planks, use a tapping block and a mallet to secure them in place. As you work your way around the room, you may need to use a circular saw to cut the planks to fit. Once all of the planks are in place, you can enjoy your new Home Decorators Collection Vinyl Plank Flooring.

Conclusion

Conclusion

Installing Home Decorators Collection Vinyl Plank Flooring is a relatively easy DIY project. With the right tools and materials, you can have a beautiful new floor in no time. Be sure to take your time and follow the instructions carefully to ensure a professional looking installation. Good luck and happy flooring!

Comments

Popular posts from this blog

How to Install Coretec Plus Vinyl Plank Flooring

How To Clean Commercial Vinyl Tile Floors

How Long Does Vinyl Flooring Last?